Worx WX540 Manual de Instruções descarregar pdf (Página 12)

WX540

WX540.3 WX540.9

12V Li-Ion

multi-purposed saw

OPERATION

WARNING: Always wear eye protection while

operating this or any other power tool.

WARNING: Burn hazard. Do not touch the blade

immediately after use. Contact with the blade

may result in personal injury.

Before you begin work, ensure the material to be cut is

rigid. Small workpieces should be securely clamped to

a work table.

1. SWITCHING ON AND OFF (See Fig. I)

For starting operation of the machine, actuate the

lock-off button (2) ﬁrst, then press and hold the On/Off

switch (1) afterwards. To switch off the machine, release

the On/Off switch (1).

For safety reasons the On/Off switch of the

machine cannot be locked; it must remain

pressed during the entire operation.

2. HAND GRIP AREAS

Always ensure you maintain a ﬁrm grip while operating

your jigsaw.

3. PROTECTION FINGER

The ﬁnger is located in front of the blade holder. While

working, it will help prevent accidental contact with the

moving blade.

4. LED WORK LIGHT

A light (8) is built-in near the end of the protection

ﬁnger. The light will automatically come on each time

the on/off switch is depressed.

5. CUTTING

WARNING: Always wear eye protection while

operating this power tool.

WARNING:

• Never hold the pivot head when operating the

tool.

• Never hold the motor cover when operating the tool.

Before cutting any type of material, be sure it is ﬁrmly

anchored or clamped to prevent slipping. Holding the

work by hand or against your body leaves it unstable

and may lead to loss of control.

• Place blade lightly against work to be cut, depress the

trigger switch and allow it to obtain maximum speed

before applying pressure.

• Whenever possible, the saw foot plate must be held

ﬁrmly against the material being cut. This will prevent

the saw from jumping or vibrating and minimize blade

WX540

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Worx WX540 Manual de Instruções Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Serras circulares Worx WX540